Industry News

Design Phase for CETO 6 Wave Energy System Completed

The conceptual design phase of Carnegie Wave Energy Limited’s CETO 6 Project at Garden Island is complete.


The CETO 6 concept design is the culmination of work commenced in 2012 and incorporates lessons learnt from the Perth Wave Energy Project, recent wave tank testing in Scotland, internal design and modeling studies and design work undertaken with Carnegie’s supply chain.

This CETO 6 design delivers a number of advantages over previous CETO generations including an approximate four times increase in rated capacity to 1MW, the removal of heavy offshore lifts (and associated costly heavy lift vessels), simplified installation and maintenance and more advanced control systems.

The system locates the power generation (power take off or PTO) inside a contained vessel (Pod) inside the Buoyant Actuator (BA). Locating the PTO inside the Buoyant Actuator allows more advanced control increasing system efficiency. The use of an electrical export cable (or umbilical) to deliver the power onshore also reduces transmission losses when compared to the use of a pipeline with high pressure fluid as used in the Perth Wave Energy Project’s CETO 5 technology generation. The incorporation of the power generation equipment offshore also increases the market for CETO as it can take advantage of deeper, more distant to shore wave resources and sites.

The wave tank testing of scale CETO 6 models at FloWave in Edinburgh, United Kingdom formed an important part of the overall concept design as these tests, along with PWEP results, confirmed that the targeted 1MW nominal unit capacity was achievable.

The offshore geophysical survey activities for the Project are now complete, with a preferred Project site having been identified some 10km offshore from Garden Island. The geophysical survey results, along with the concept design results, feed directly into the detailed design of the Project. Detailed design is targeted for completion in mid-2016.

The CETO 6 design is the CETO product platform that will be used subsequently in commercial CETO projects. Initially these commercial projects are likely to be in locations where conditions are most supportive of early commercial project delivery such as in the UK and Europe where there are dedicated sites, infrastructure, supply chain and feed in tariffs already in place for wave energy.

The CETO 6 unit has a targeted 1MW (1000kW) power capacity, some four times of the current CETO 5 generation being used in the Perth Project. It will have a superior efficiency, lower capital and maintenance costs than any CETO product generation developed to date. The CETO 6 Project is supported by $11m funding from the Australian Renewable Energy Agency’s Emerging Renewables Program and a five year $20 million loan facility from the Australian Clean Energy Finance Corporation. The clean, renewable energy generated by the Project will be sold to the Australian Department of Defense at Australia’s largest naval base, HMAS Stirling, on Garden Island in Western Australia.

About Arena

ARENA was established by the Australian Government to make renewable energy technologies more affordable and increase the amount of renewable energy used in Australia. ARENA invests in renewable energy projects, supports research and development activities, boosts job creation and industry development, and increases knowledge about renewable energy. ARENA is currently supporting more than 200 projects and is actively seeking new projects to support.

Our Partners

Frontiers in Marine Science

ECO Magazine is a marine science publication committed to bringing scientists and professionals the latest ground-breaking research, industry news, and job opportunities from around the world.


8502 SW Kansas Ave
Stuart, FL 34997


Newsletter Signup

Please type your full name.

Please type your full name.

Invalid email address.

All emails include an unsubscribe link. You may opt-out at any time. Clicking subscribe confirms your acceptance of our privacy policy.